I usually run dual monitors on my laptop when at my desk, and sometimes
when I am back to a single monitor some programs will still try and run
in the other dual monitor.  Even though the dual monitor option is
turned off. The only way I have been able to get them back it to

I'm in a really big mess here.
I had a windows XP installed on a SATA drive that was connected to the
motherboard on a regular SATA controller.
I have another disk connected alone to an onboard RAID controller which

We have a number of Gateway Solo5350 laptops - 1.06ghz that shipped with 128
of RAM (old - yes). We upped the RAM a couple of years ago to 256 -
everything was fine.  Now trying to go to 512 and laptop won't load.   This
laptop is rated to accept up to 1g RAM - 133MHz SDRAM.

After extensive searching, and finding surprisingly little information
on my problem, let alone a solution, a post to this group seemed
appropriate.  I have 2 SDRAM DIMM 256 MB sticks.  One is a PC100, the
other a PC100/PC133.  By themselves, they both run fine on my older

When starting up the PC, windows goes through a disc consistency check, this
occurs about once a week at random times, I have cleaned up the disc,
installed a new power supply and it still persists.  No problems are found
its just that it takes about an hour and if I skip it it ...

Does anyone know the difference between the tools sigverif and verifier in
Windows XP. Do they both identify unsigned drivers or is there more to it
than that?
Thanks

I want to get a Geforce 6200, it requires an AGP slot. Does my Dimension 5150
have one? and will the video card work?

My Computer keeps shutting off?
I bought a new PC Power & Cooling ATX 360 power supply. It is still doing
it?
After it shuts off, the power button does not work. I can either do the PC

After installing XP, my 300GB SATA hard drive wont read above 127GB. I found
out that the XP Service Packs 1 & 2 must be installed, then you have to
extend the partition to read the full drive's size.
I did this, which worked, but now my PC constantly resets for no apparent

I have a PC with XP home, most times I switch on the boot cycle starts then
I get a black screen with a
message
"reboot and select proper boot device or insert boot media in selected boot

i have had the hybernation issue on my laptop since i first got it. i got my
pc like 9 months ago. i tried everything to fix the issue but nothing work.
i have a zd8000. it has 2GB of DDR2 RAM, 256MB of VRAM, a 3.4GHz processor
with HT technology. i basicly purchased the PC with ...

My boot disc is a 200 GB western Digital cavair SE 7200 (C drive) and the
same but 160 GB (F) as a simple file storage system.
My BIOS is somewhat old but still decent (gigabyte 8I-TXE) and supports 48
bit LBA. But when I tried to format "F" it was capped at 70 GB.

I have a generic optical wheel mouse (mostly because I'm tired of $40 mice
going bad).  I don't use the 'autoscroll' function of the wheel button much,
so I'm wondering if there is a way to reassign it to do something else, say
minimizing and maximizing windows or 'double-click'.

How do I reinstall drivers for these please.. i have anewish computer - about
1 mnth old. Pentium 4.3, Foxconn motherboard, SIS graphics & USB.
All worked fine for a couple of weeks then the message about device
malfunctioning started to appear. I have tried most things suggested ...