I have a JustLink (Ricoh) RW5240 DVD-writer in my PC which suddenly
gives the error 'A disc with an unsupported format in drive D' when
inserting a commercial DVD-ROM in it.
This used to work fine before! I had been switching the region code

I recently swapped my HD for a new one and made the old one the slave.
I'm achieving fast transfer rates with the new, master drive.  According to
the PC Pitstop Full Test the old drive is only "delivering" at 8 mbps.  I
knew it was slowing down but that seems very slow.

I have a Compact Flash (512MB, CF-II) card I use in my camera (FAT16).  Due
to it's size, I also use it to transport files between work and home.
Recently, something happened that caused some of the files to become
corrupt.  The work files I keep copies at both locations, so I'm ...

I get this error message when I try and Scan:
_Can't_locate_device;_check_cable_and_power._(-4536)_
- The Power Cables are fine (when I unplug either of the cables my
computer makes a sound indicating plug-and-play)

Hi -- thinking abouts setting up a raid 1 and have a couple of newbie
questions - wondering if someone might know the answer to.
My understanding is that windows will see only 1 hd when a raid1 is
setup properly however I am wondering:

How! to find out what Motherboard I have in my computer.

Hello, i'm mark i have a very interesting question for any one to hel
me please i have Windows XP home i have 3 hard disks and 2 CD ro
drives could any one tell me if XP has been told to only suport
devices my main bourd suports and detects all 5 and i was wondering i

this is a problem I got?? After windows boots, I get this system erro
C0000Z1A, then the pc says it needs to shut down???? any ideas??
--
mad85

I recently bought a SATA 250GB western digital hard drive to replace
one of my two 40 GB hard drives.  So I set the 40GB drive to master
with the intention of making the C Drive 40GB and the    250GB SATA to
Slave using a SATA to IDE(the only hard drive type my motherboard will

Is it sufficient to match the speed (i.e. PC2700 with PC2700 or PC4200 with
PC4200) and type: single-sided/double-sided, single-channel/dual-channel,
CAS, DDR1/DDR2....? I understand that the speed has to be the first to match
but what else, and in what order, do the other ...

I've got a question about DVD Burning.  I'll give just the basic info
as it might be a simple "can't be done" answer.
I have an .ISO file already created that is about 4 gigs in size.
This should be able to be burned as a viewable DVD.

After installing XP home I downloaded a Cyberlink DVD decoderand installed
it. I have two LG DVD drives: GSA-4081b & GDR-8162b. Bith work fine and no
problems in the past. when I finished installing the decoder I opened the
program and went to look for the DVD that I wanted to ...

I'm looking to attach two monitors to my latitude d800 laptop.  Both
monitors should be clones of the built-in laptop screen.  Since my latitude
only has one vga port in the back (as does it's docking station), I'm unsure
of what hardware i will need to accomplish this, or which ...

I recently installed two gigs of ram to the ram I already have which gives me
four gigs. When booting up the system I go into to setup and can see that I
have four gigs of ram. After booting into Windows I go to control panel/
system and the information is saying that I have 2.50 ...

hi everyone newbie here so be kind.first up my sys is as follow AMD64
BIT 3500 ASUS A8N-SLI PREMUIM MOB 6800GS 256 MB PCI-E GIGABYTE GRAPHICS
SATA 120GB H/D AUDILGY SOUND CARD 17INCH SAMSUNG TFT MONITOR not a bad
sys,well i thought to,especially bought for fs2004.well it runs like a