| Thread | Last Post | Replies |
|
| Safely Remove Hardware Error | 17 Sep 2006 05:16 GMT | 3 |
When I try to disconnect a USB device, I get this error: "The device 'generic volume' cannot be stopped right now. Try stopping the device again later". No matter how long I wait, I still get this error message when I try to disconnect a device. There are no processes accessing ...
|
| Backup of HP partitioned drive | 16 Sep 2006 21:23 GMT | 1 |
I have a 70.3 gb drive designated as Presario (C:), of which only 6.8 gbs are being used, and a 4.13 gb drive designated as Presario RP (D:), which contains a system recovery image of everything originally placed on the computer by HP.
|
| 4 Gb Ram: Windows reads only 3 GB? | 16 Sep 2006 18:19 GMT | 10 |
I have a dual Xeon with 4 gb of Ram ,4 modules of 1 gb each of the same type, they all work if installed 2 by 2 in any combination. The mainborad with 4 modules of 512 mb sees everything; I've tested just to check if there was something wrong on it. If I install the 4 1 gb moduls ...
|
| Software to Monitor Motherboard Battery | 16 Sep 2006 17:24 GMT | 7 |
Is there any software out there that can monitor the condition of the motherboard battery?? Thanks, James
|
| funny mouse. | 16 Sep 2006 17:01 GMT | 3 |
Hello all,can anyone stop me going insane,My PC has suddenly started to go into full freeze whenever I right click on my desktop or in my documents,the hour glass comes on and stays on & on & on & on & on,I then have to either restart or log off and log on again,someone advised
|
| XP setup vs. partition table on secondary master | 16 Sep 2006 16:06 GMT | 1 |
I have lost my E: partition(table) twice after running windows setup. First loss occured when I tried to repair the Windows installation and the second happened after a complete reinstall. When the setup finishes I'm left with two volumes (C: and D:), the third disk is reporting
|
| sATA hotplug Disk is not shown after disconnect | 16 Sep 2006 12:22 GMT | 2 |
Asus P5MT-MX/C with ich7R Chipsatz from Intel System: Windows 2003 Server The problem is: If the Harddisk is disconnected (sATA Hotplug Frame) and then
|
| Flash Drive Letter Assignment | 16 Sep 2006 10:24 GMT | 2 |
WinXP SP2: When I plug a flash drive into a usb port, an icon appears in the system tray indicating that the drive is recognized and ready to use, but the OS is not automatically assigning a drive letter to the device and I
|
| Half duplex ethernet connection. How? | 16 Sep 2006 09:53 GMT | 2 |
Hello, group. Did somebody happen to establish Ethernet connection over a single twisted pair? (Half-duplex) I know that IEEE std 802.3 describes it, controllers and drivers
|
| installed Xbox 360 controller, now when it's plugged in sound won' | 16 Sep 2006 03:39 GMT | 2 |
Installed Xbox 360 controller, now when it's plugged in no sounds will play I installed the Xbox 360 wired controller software from http://www.microsoft.com/hardware/gaming/gaming.mspx and now whenever I plug the controller in, I hear no sounds from the computer, except out of ...
|
| CD drive not recognised | 15 Sep 2006 19:49 GMT | 1 |
I tried to access my cd-rom and dvd drives earlier and get (ERROR 19) message come up. I have tried going into device manager and uninstalling them both and then re-installing using the install new hardware wizard but I get a message telling me that the configuration information ...
|
| can't install hp printer | 15 Sep 2006 19:01 GMT | 11 |
I am trying to install an HP color LaserJet 2550 printer on my new Dell Inspiron E1505 laptop with Windows XP. I am installing from the installation CD that came with the printer. I had no problem installing the same printer on my old computer a year ago.
|
| Transfering settings and programs | 15 Sep 2006 18:55 GMT | 7 |
I recently bought a new computer when my old one stopped working. I removed the HD and have made it an external drive, but I cannot seem to boot from it. I tried adding the old HD to the new computer, but nothing would work. I am certain I set the old HD to be the slave and the ...
|
| on-board LAN card problem | 15 Sep 2006 16:59 GMT | 10 |
hai all, i will be brief. my hardware is: LAN Card: RealTek RTL8201CL (on-board) Motherboard: ASUS K8V-MX
|
| CDROM Drive does not recognize blank CDs | 15 Sep 2006 16:27 GMT | 2 |
I have a laptop which I just did a clean install of XP Professional. After the install the CD Drive works fine reads CDs, DVDs no problem. Then I put a blank CD in to write to and click on the drive and it says D:\ not accessable and will not recognize a blank CD at all, tried ...
|