Hi, I am developing a data transmission circuit using the Cypress
EZ-USB development kit.
I have a question about setting register. When I unenable a certain
pin, for example, CLKOUT pin, it have to be 0 Voltage, I think.

Had a power surge take out a mother board on old computer.  Ordered
new Dell with SATA single drive.  We are hoping the original ATA drive
was not damaged, and can be installed as the D drive on the new
computer.

I'm new to Bluetooth technology, so forgive me if this is a dumb
question - is it possible to use a combination of the Trendnet TBW-
102UB (or similar device) and headset (Plantronics Voyager 510
Bluetooth Headset with Multipoint Technology, for example) for

I have just installed a new usb 2 card onto an old machine, running xppro sp2
but the motherboard is a gygabyte 440bx, will it be supported as I am now
getting blue screen of death as a result

I have a win98\xp setup, both on different drives. XP has two partitions -
ntfs\fat32. It's the fat32 I'm having trouble with, it won't stay formatted.
If I use xp, 98 wants to format it. If I use 98 then they both want to
format it after re-boot. I want to setup a third OS. I can't ...

I have an external 52x Memorex CD-R and a 120 GB external hard drive.  Both
connect to my Laptop via a USB connection.  When I'm transferring music
files from a CD to the hard drive, the transfer rate is very slow (about
1.5x).  Is there any settings or anything else I can change ...

I just bought a fellowes wireless keyboard. When I plug it in and reboot it
says no keyboard reconized. Then when windows opens it says found new
hardware but does not find a driver. It searches to no avail and I get an
error 28 when I check device manager. I called fellowes ...

Started playing a new game last night but after an hour the picture
started breaking up. Thinking I needed new drivers I uninstalled the
ATI ones, along with all the recommended registry entries etc as usual.
When I tried to install the new one it kept getting stuck late on with

When I first start up my computer, my monitor screen goes black for a while
until I hit it on the side.  Sometimes it fade to black and back on.  After
about 30 minutes, it stays on.  Can this monitor be fix?  I have an IBM
2140.

For those who have a scrolling problem where it does not work as
expected or as smooth as it should, just replace those darned batteries
that come with the Wireless Optical Mouse or Desktop and it will work
correctly. Took me a week and when all else failed I decided to try the

My computer keeps telling me to Add a USB Hi - Speed controller to the
computer.
Also when I use a hub it tells me that the hub exceeds the power limits of
its hub port.

My DVDRW won't read any discs, however there is power and it ejects ok, any
ideas?
Cammy

Heres the thing...
A friend has leant me a 3.5" HDD External caddy with a 30gb Maxtor HDD
in it, although he's only put it together and never used it.
Most of the time it shows up OK in device manager under Disk Drives (as

I just purchased Sprint 6700 Pocket PC containing Windows Mobile. I cannot
get MS ActiveSync to work. The message on Connection Settings says "Waiting
for divice to connect".
My PC is a Toshiba A75-S209 running off-the-shelf Windows XP Professional.

I'm wondering if there is a way to test an NIC card for instability.
I have a dual boot system, win 2000 pro and xp pro and I've noticed
my DSL modem connection light to my ISP provider seems to go bonkers
from time to time and I lose the DSL connection.