Asus help is not existing.  My problem:
Recently at the end of the booting sequence (but before Windows load) for a
moment (it's hard to catch) I see on screen some message saying (as I could
catch it):

I did a clean install of win xp..have all the updates thru SP 2..
My speakers are hooked up correctly, but i cannot get it to configure
correctly, as i cannot get the sound to work.
i have tried to remove them under device mgr and then 'add new hardware' but

What are the symptoms of a inadequate Power Supply Unit, other than not
booting up system
Some USB devices I run don't seem to work unless you remove them and plug
them in again and some USB devices don't want to work all, i.e a USB flash

I just installed a 250GB drive (WD WD2500JB). No problems with BIOS or OS
(xp sp2) recognizing and using the drive, supports 48bit LBA.
However,
1) I noticed that Disk Manager in Windows XP SP2 reports the disk as 232.88

I've built my own PC and Installed Media Center and want to be able to use
Media Center on the TV while using the PC Monitor for something else. The
video card has to outputs so I'm working on that but how can I have 2 sound
cards so one is used by Media Center and one by XP ?

I keep receiving a message the my memory is low and it tells me to increase
my virtual memoryHow do I increase virtual memory.    HELP

ItI installed a new 80 gig hard and loaded XP an all the updates. I moved the
old to slave and put jumpers in and the new one works great but how do I get
into all the old information I had on the old HD. I still have XP loaded on
the old HD. There are things I would like to have ...

Is it possible to get the HP Share to Web program to work correctly with
Windows Media Center 2005 with Rollup 2?  I have a button on my scanner for
this which I would like to use.

Recently I upgraded to SP 2 and now windows won't boot properly, it gets so
far them I get the black screen with startup options?
Start up in Safe mode with networking works, the only way to boot normally
is to do a system restore that takes me back b4 SP2, any ideas?

I cannot record to a CD-R on seperate occasions, even though the Cd is not
Full. CD-RW work Fine. Is there a setting that I must utilise to allow
multiple recordings.
I have been trying to transfer photographs to a CD-R until it is full, but

I am asking for an example of customized hardware platform where xp embedeed
can be installed. (e.g. xscale270 @ 533MHz with 128MBRAM + 64 FLASH + eth).

Anyone ever see a blue screen with this ??

My DEVICE MANAGER window (from CONTROL PANEL | SYSTEM PROPERTIES | HARDWARE)
is empty – all icons disappeared.
My NETWORK CONNECTIONS window is also empty.
I tried the SYSTEM RESTORE to go back to a safe point, but it is also

burns half way then has a file problem using nero6

Sorry, this was original posted in Windows Media Center group.... I think
hardware is more appropriate.
COMPUTER INFO
- HP Pavilion Laptop (ze5700)