My warranty replacement 19" LCD, (brand new - don't I feel good?!), just
arrived, and there is no DVI-D lead in the box !
(...I knew I shouldn't have done as their warrant division asked, and
"...make sure that all leads etc. that came with it, are returned with

1.Why does a newly added internal SATA HDD appear in this but not a wireless
USB adapter?
2.New SATA internal drive, wanted it split into 2 roughly equal partitions.
Created one logical partition but when I went to create the second the only

I have a 10 gb maxtor HD set as master with windows xp pro loaded, and a
secondary master 80gb hitachi unformatted hd installed as well.  BIOS detects
both HD without a problem, and in windows device manager it shows the HDs
too.  The  problem is when I open my computer it only ...

I have a computer that has the following GPO settings:
Monitor turns off in 15 minutes
Hard drive turns off never
System standby set to never

Sorry if this is a bit OT
In February I bought a Digimate 19" L-1925 LCD monitor, and two or three
days before the 20th September '06, it died on the DVI input.  (I swappped
out DVI graphics card to a known good one to rule out a dead graphics card).

How come almost always whenever I try to open Windows Movie Maker, the
following system error message pops up: WINDOWS MOVIE MAKER...Windows Movie
Maker cannot be used because the required audio hardware cannot be found on
your computer.  I own an HP Pavilion dv2037us ...

I need install printer driver for HP LaserJet 3055(network printer,
attached to another PC).
Since microsoft driver installation instructions and HP installation
instructions are contradictory, its not fully clear which way correct.

I've added 2 GB of memory (total of 4 GB)
The bios sees both new dimms, and when doing the detailed memory test
at bootup does not find any errors.
However 'My Computer' only reports 3 GB.

Can anyone tell me how i can view my computer from a normal TV set so
can view films via cd/dvd rom, and games, if so can you tell me "i
anything" what i will need...thank
--

My grandmother's wireless mouse is slow and you have to click on an
icon several times for the program to open/respond. She says this
doesn't happen all the time but I used her computer for about 6hrs one
day and had this problem the entire time.

Have ordered a 1 port USB print server so that I can print from wireless
enabled laptop without switching on main PC.
Question is can I also scan from laptop if scanner is connected to it
assuming scanner drivers are loaded on laptop?

The Other Day I Was Given advice on fixing a certain problem with my
easyshare camera by un-installing my USB Controls. Doing this was supposed to
"reset" the whole part of that after the restart through Windows Update
according to this person. Well, I did this and restarted. ...

Will a PCI card 2.3 operate correctly in a 2.2 PCI slot of my motherboard.
Steve

I want to purchase a PCI card with a SATA II connection. Can this card be
connected to a SATA I disc?

Hey guys. So here's the deal:
I've got two audio devices (USB Speakers + Onboard Audio) and I want to
listen to the same sound output on both.
For example: I'm listening to a song in winamp, it should play on both