I am setting up a wireless network for my neighbour and have got his new
Netgear wireless router/modem working fine on one of his PCs OK.
I am not familiar with the proprietary software on his Sony Vaio Laptop but
the built-in wireless adaptor cannot see any wireless networks ...

I just upgraded my 1 1/2 year old Compaq desktop to 1 GB of RAM from the
original 512MB.  Everything is fine and the conmputer recognizes the
increase.  Only problem is that when I boot up the computer, the screen goes
black for 40-45 seconds with no hard drive activity.  This ...

I have a 1 gig, PNY Mini Attache that won't connect at the 2.0 speed.
I have to insert/remove it several times before it will connect.  When
I insert the drive, the "this device can run faster if you connect it
to a 2.0 hub".

I've just purchased a Microsoft Desktop 6000 and there's a few problems
using my KVM with XP.... don't know if it's the KVM or XP or the 6000. The
mouse won't work at all (works fine directly pluged into the machine) and on
the keyboard none of the "extra" keys work (email, ...

My cd drive has suddenly disapeared when I look in device manager the cd
drive has a yellow exclamation mark and says  "A driver (service) for this
device has been disabled." How do I re-enable it I tried uninstalling it and
restarting windows but get the same result  Thanks

I want to download drivers for a Microsoft Mouse - but how do I tell if I
want the 32 bit, 64 bit, or OEM version?  The system is running Windows XP
Media Edition.

I know little to nothing about this specific pc, it doesn't have an internal
cd drive nor a floppy, just a USB port, it has a problem with com1 the
firmware isn't allow full resources for the device, course I'm not able to
logon as admin, it's a coworkers sons pc, and I said I'd ...

After having installed the Logitech Keyboard Lx 710 with the mouse, all
wireless all worekd fine. Then I have installed the Software going with
(Logitech Setpoint 3.0) and during the installation I had to leave in
urgency. Coming Back the PC was Shut down. Pushing the button, ...

I have a Samsung SC-152L 52x CD-ROM drive. I have recently installed WinXP
and there were errors but it eventually installed the OS. When I eventually
got into Windows the CD-ROm drive was not working and was not available in
Device Manager though it was showing in the BIOS.

I returned my faulty vid card, and recieved a new card, popped it in the
machine, and it wouldnt boot. All connections to power for the vid card
are fine, but it doesnt work. So I cleared the cmos, selected my raid
options in bios, stat 1 and 2. Now all I get is disk boot failure

How do I slave a drive.  I have two PCs and my power supply went out on one
of them. I want to be able to transfer my files from it's hard drive to the
other.

I have bought a toshiba tecra a8 laptob but affter two months when I was
working with it a band appears at the bottom of the monitor . I install
windows xp again but I can't continue because of the band exists. now it is
returned to the sello for repair and they told me the lcd ...

I searched first and counldn't find the right answer.  I hope somone
can help.
I recently installed an extra 512 MB of RAM in my computer.  The POST
test reports the correct total (1 GB) and when I look in Windows under

I replaced my old 15 GB hard drive with a new 40 GB, I installed the old one
as a slave.  The bios reads it and so does device manager. I went to disk
manager and the drive is not listed. I tried rescanning and still no luck.
Please help

How can i ensure the safe removal of a USB drive or memory stick from
Windows XP and WIndows 2003 server safely - from my own program without
the user having to click on the icon in the systray. The SYNC.EXE
program from sysinternals only appears to do half the job. I.e., you