I have a SATA drive with C: (primary part) and D: (another primary part).
I used Norton Ghost to copy my system drive to a new (SATA) drive.  I
checked the box to "make new drive active".
If I swap cables and leave the old drive running, the computer boots off

I have a client who has disabled her graphics adapter in the display
properties section. now when she boots up she gets the windows xp screen
(black one) then the screen goes black but continues to load windows without
display. i am sure there must be a simple solution to re ...

Some while ago I added 2 new hard disks.  These worked fine. On Friday I
updated windows from the Microsoft site.  After this I received a "boot
failure" message.  I tried to resore using F10 to reboot from the restore
sectore on my hard disk, but this did not work. I restored ...

I upgraded my PC to Windows XP Professional SP2.
All drivers devices was installed for WinXP program installation.
Only one not: video card.
There is a SR9 AGP SDRAM NLX 8MB Video card.

Ok,
Here is the story... I have been given the task of getting some
important files off of an old server that started acting up (Would not
boot).  The server had 3 SCSI drives A, B, and C.  These three drives

When I try to boot my computer. I get message NTLDR missing.I formatted my
hard drive.

Chkdsk from xp's recovery console continues to find errors
in the volume when I use the /p switch. For more info on my
dilemma please refer to the threads in: Chkdsk Continues to Find Errors,
in this newsgroup.

You all all have been so helpful with my questions pertaining to how
to optimally setup my swap file and partition my drives. In a few of
the posts, it was recommended that I set up a small partition on the
drive which does not contain the OS and use that for any temo fiules

I recenlty got a new computer with a 300GB RAID 0 (2x 150GB Raptors)
as one drive and a 500GB storage drive as a second drive. I am running
Windows XP Media Center 2005 with a Core 2 Extreme processor and two
GeForce 7950 GX2 video cards set up in a quad SLI config. I also have

PCI Express
Where is a utility to DL that will check the PC hardware similar to Belarc?
I need to buy a new Video Card but HP does not list if this PC has plain PCI
or PCI express.  Also it requires a 350w Power Supply.

I am sorry if this is a bit long, but I appreciated it if you can answer my
question
My laptop is HP-Pavilion-zd7377EA, with 1GB memory (512MB x 2)
Today, suddenly, my computer hanged. When I turned it on again, it did not

Re: SR1500NX Powersupply / PCI Express
Compaq Presario SR1500NX Desktop PC -  Product Specifications
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?lc=en&cc=us&docname=c00387080
I need to buy a Video Card.  Belarc nor HP lists the Power Supply.  The

I have searched for hours and hours and cannot find a FREE dvd
formatting utility.  Does anyone know where I can find a simple, easy
to use and FREE DVD format utility?  It must work with any brand dvd
drive.  I'm thinking of something along the lines of Panasonic's

I recently installed new memory in my computer, going from 512 to 1024.  The
POST test shows the 1024 and System Information under Accessories shows the
1024.  However, when I hit control-alt-delete WIndows Task Manager only shows
the 512.  Any ideas?

On XP SP2 I use the Roxio Drag-to-Disk. On a second computer
I'd like to install a software utility that does nothing but
allow me to drag files selected in Windows Explorer to
another Windows Explorer displaying the blank DVD. Then burn