I keep getting error message - 'xprt5.dll is missing'. Can anyone tell me
what this is and how to restore it? Thanks

Hi there,
I hope you can help basically I get an error message saying
"USB Device Not Regonized".
Attached to the PC is only a Globespan ADSL Modem which device manager

When i start up the computer (windows XP, about 4 yrs old) the system sounds
like its struggling and then the whole thing dies. The green light on the
front of the unit remains lit and given about 20 seconds it tries to start up
again. The fan at this stage sounds normal and it ...

my computer wouldnt print said no printer, every time I try something like
installing, the message states "no print spoolers" It seems like it is trying
to pretend its a networked printer, say in an office, or maybe networked on
the internet.

For an old laptop (Dell Latitude cp 233), I need the NeoMagic
MagicGraph128ZV/ZV+/XD driver for Windows XP SP2:
Could you help me indicating a site where I can download it for free?
Thank you very much!!!

It seems that my XBOX 360 HD DVD Player is causing my XBOX 360 console to
fail (three flashing red lights).  When trying to play HD DVDs in the player,
the screen freezes and will not turn back on.  I'm unsure if the problem is
within the console or the HD DVD player.  Any ...

I just replaced a MS Wireless Intellimouse 2.0 with at MS Wireless Laser
Mouse 6000... The laser mouse tracking seems quite "ragged" compared to the
old mouse.
On a piece of white paper, the mouse will jump a bit left and right when

Been watching posts concerning the usb connect message, "This device can
run faster... usb 2.0..." and have experienced it several times myself,
and, in the past, simply given up as I knew things were plugged into 2.0
ports and hubs.

Is there any way to upgrade or change the USB capabilities of an old system
(pre 1999 on an Asus-P2B-LS)? This system has USB ports but because of its
age must be USB 1.1. I would like to use a USB 2.0 external USB wireless-G
USB adapter to incorporate this box into my network ...

I have two DDR DIMM slots on my motherboard and before I had
768 (512 + 256) MB memory with two memory modules. Everything
was fine at that time. Recently I bought a 1 GB DDR DIMM 400 MHz
memory module. My motherboard's manual tells that I can use up to

I have one machine where no matter how many times I install/uninstall the
driver for the LaserJet3500, it will fail to print a test page unless the
user is an administrator.
Any ideas?

I hope someone can explain what is happening on the following config:
I have an IBM Thinkcentre m55 (Core Duo 1.86 with 2Gb RAM) - it has an
onboard video controller.  This machine does NOT have a PCI-EXPRESS 16 slot.
I needed to run a 3D application so I got a PCI (old standard) ...

I see many posts, but none that have addressed my problem.
A clients computer (HP Pavilion a320n - XP Home SP2) shows no sound device
in Sounds and Audio Devices Properties. I have:
Installed the correct drivers for the on-board sound (mobo: ASUS A7N8X-LA )

Hi all,
there is a delay writing failer during i was moving files to 1 USB hard
drive and plugged another USB hard drive in.then 2 of the USB hard drive
stopped working and do not appear under My computer. There was few error

Need software to copy a limited number (eg - 100) of randomly selected
files from a large library (eg - 1000) of *.mp3 files ...