Due to several "blue screen", I decided to check the memory of my PC (
Mother Board: GIGABYTE GA-K8NXp-SLI with 2 x1Go Corsair XMS Platium series,
this configuration has worked fine for more than 1 year).
I made test with Windows Memory Diagnostic" (WMD) and MEMTEST86.

My friend's computer suddenly failed in the midst of him looking at a
website. When we tried to get into check the CMOS settings, all the
words appeared garbled. For example, "boot" is spelt "bont" or "Drive"
becomes "Frive" etc. At first, we suspect something is attacking CMOS.

Why can't I save my settings when I change from right hand mouse to a left
hand mouse?  Every time I log on I have to re do it.

I have a MSI km4m-v AMD board that I wanted to upgrade the memory.  I
found a deal at Fry's for 2gb of PC3200.  I thought I had 400fsb but
turns out the MB supports up to 333fsb.  I was reading that my MB
supports memory at 2.5v.  I was wondering if PC3200 w/400fsb will run

I'm wanting to install a new internal HD.  I need to enter CMOS/BIOS to
check some settings.  When I boot, my options screen lasts only 2-3 seconds.
I did see that DEL and ALT+F2 are options.  Del took me to a dialog to
select a boot-up device.  Alt=F2 took me to Flash Bios.

Those are the symptoms:
When I try to create a DVD once the burn is completed I get an error that It
could not writt the lead out-the DVD is no more accessible.
When I try to open explore the DVD writter and there are no DVD nor CD it

My USB flash drive is formatted as FAT32.  Is it possible to re-format it as
NTFS and gain from the increased speed of NTFS over FAT32?
Is it possible to install and update Norton Internet Security on a USB flash
drive?  My objective is to use it to diagnose threats avoiding ...

I am running XP MCE with a ASUS motherboard that supports 4 SATAII hard
drives.
I currently have drives C, and D.
I purchased a new Western Digital 500gb. SATAII hard drive and installed it

I re-flashed the bios in my SiL 3112 SATA hard disk controller so as
to give me RAID capability.  Unfortunately I stupidly omited to
install the corresponding Windows device driver beforehand, and now my
installation of Windows XP SP2 won't  boot.  It gets as far as the

I am running XP SP2 on one of my machines at work.  When I attempt to use
Disk Management to create a second partition of the C-drive (the drive is
more than half empty), tt indicates that the entire drive is taken up by the
original partition, and I get no option to make a ...

I have Win XP SP2 and inno3D (the display card) and it makes the blue
screen.
What should I do to overcome this problem.
Thanks

Have something strange going on with one of my USB ports.  If a memory stick
is inserted, the computer gives the normal double beep sound.  However, the
drive is not accessible, nor does it show up under device manager.  When I
remove the mem stick (it does not show up under ...

I recently started experiencing the following error coming from my BIOS
MP3 error 2
it flashes on the screen just after scanning my SCSI drive, I have no idea
where to look for more details, I've looked in the BIOS, nothing appears to

Interesting thing, this machine has XP installed and was working for 2
years.
P4 2.53Ghz/1GB DDR/80GB
I can actually boot to XP, but it locks up with corrputed file errors.

I recently (days ago) purchased a Logitech MX Revolution mouse.  Part of the
installation involves installing Logitech Setpoint software.  Anyway the
issue began when I attempted to fix a software issue.  I uninstalled
Setpoint, and then noted my PS/2 Microsoft Internet keyboard ...