Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsWindows VistaWindows XPWindows MeWindows 98Windows 95Virtual PCInternet ExplorerOutlook ExpressWindows MediaSecurity
Related Topics
MS Server ProductsMS OfficePC HardwareMore Topics ...

Windows Forum / Windows XP / Hardware / July 2007

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Delayed Write Failed26 Jul 2007 14:44 GMT23
Recently I have be getting the pop-up balloon stating:
{Delayed Write Failed}
Windows was unable to save all the data for the file x.
The data has been lost.
DVD/CD-RW Drive26 Jul 2007 00:31 GMT4
When I put CD in my Drive it will record and play. When I put a recorded DVD
it will play. But when I place any blank DVD(DVD-RW or DVD-R), it is not even
recognized by the drive. Why? Can I fix it?
And I try to run a DVD-Rom Test and I get an error message "Excepetion in
converting flash drive to ram25 Jul 2007 16:04 GMT5
I am using winxp service pack2 Is it possible for me  to convert my
flash drive to ram if so please mail me
Windows Media stopped working25 Jul 2007 06:44 GMT1
I am running XP and I recently installed a new G-Force graphics card. Before I installed it, instructions told me to unistall my current Dell video drivers. I uninstalled the current drivers for my dell then installed the G-Force card and installed the new G-Froce drivers. After ...
T61 cpu  frequency problem25 Jul 2007 06:21 GMT6
My ThinkPad T61 's cpu is T7500
Since I bought is, it's frequency is not 2.2G(11x200) but always
1.2G(6x200),voltage is 1.0v
I have tried to set power management in both Bios and system,but that
Windows does not recognize hard drive25 Jul 2007 04:54 GMT4
I just installed a sata hard drive and the drive is recognized in bios and in
device manager under disk drives and it also shows up in device manager under
the ide atapi controllers/ primary ide channel but is not listed with my
other two drives in "My Computer" nor does the disk ...
Any carpal tunnel friendly mice?24 Jul 2007 21:07 GMT10
   Does anyone have any experience/recommendations
for a mouse (or other) that is carpal tunnel
syndrome friendly?
Many thanks,
Mouse doesn't work after completing 1st part of system restore24 Jul 2007 20:10 GMT14
Windows crashed and I could only use safe mode.  I went through the 1st part
of system restore from the Microsoft help section and when I got to the part
where you type exit and windows restarts, my pointer and mouse no longer
work.  They are frozen, so I cannot complete the ...
Error in .inf file, written for win 95 or later??!!  please help!24 Jul 2007 17:22 GMT3
I am resetting up an ECS D6VAA dually with an onboard second IDE/ATA/RAID
controller, Highpoint 370.  I am using WinXP pro SP2.  I have had it up and
running before and now want to use it as a server, since it can handle eight
drives.
HELP - No recognition of any new hardware24 Jul 2007 15:34 GMT1
I’m running Windows XP service pack 2 and seem to have a problem with
anything I do not have a driver disk fore. Windows installer finds the
hardware, looks for the driver needed, but never finds the driver - not for
anything, not even devices that has been installed earlier on, ...
Annoying behaviour in WMP when plugging in USB stick24 Jul 2007 15:27 GMT3
I like Windows Media player to be in Skin Mode. Whenever I plug in my pen
drive (and my work requires me to do this several times a day) the damn
program jumps to Full Mode. I'll decide when I change to full mode you
moronic program!
Replace system drive24 Jul 2007 14:50 GMT5
I have a 20GB (physical) system drive on my XPSP2 pc. Ik want to replace it
by a 200GB drive. I  have made an image (True Image) of the 20GB drive. Can
I just put the 200 GB instead of the 20GB (both Pata drives) into my PC and
load the image onto the 200 GB? Will it be ...
Start up problem24 Jul 2007 03:09 GMT19
I just built a computer with all new parts and about 2 seconds after
starting up the computer it shuts down. I tried taking parts out and
eventually was down to just the motherboard and power supply and had the
exact same problem. It's an Asus M2N-E. Is it the motherboard that's the
boot.ini and hal.dll24 Jul 2007 02:32 GMT1
I am trying to restore the boot.ini and hal.dll and my password doesn't work
on the restore control menu.
Laptop not recognizing hard drive enclosure24 Jul 2007 00:56 GMT10
My PC recently failed(the power supply went bad and replacing it
allowed the computer to turn on, but the monitor said no signal
detected so I had problems other than the power supply).  I  removed
the hard drive from the PC and bought a hard drive enclosure which I
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 June, 2007
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.