HI, all.
I have two IDE hard disks and one DVD-ROM, Now I have to install them to a
newly motherboard with only 1 x ATA 100, how can I do it? Thanks.

The gwl-g122 cannot work after updated to windows sp3 rc1. How to solve the
problem ??

I have a problem relating to my use of USB-RS232 converters:
When I plug one into a USB port it has not previously been inserted
into, then a *new* COM port number is used. So if I have 3 USB ports a
single converter will wind up as three different port numbers

Last week I was happily working away on my laptop, when I picked it up to
move it - the hard disk bay (which was not screwed in) popped out and the
whole disk unit came out in my hand. I was suprised when XP did not crash, so
I plugged the disk/bay back in and after a few minutes ...

I need help installing a Diamond Extremesound 7.1 sound card into my
eMachines T2878 running XP SP1. This is the first sound card--before
now sound was processsed on the motherboard.
I thought that  the BIOS had to be changed before installing the card,

My system has an Asus A7N8X motherboard with 2 SATA HDs, by Hitachi and
Seagate. Runs XP SP2. After several years' good service, it has
developed a fault that it will not boot from these drives, nor recognise
them if I boot from a floppy. However, I can boot from an old IDE HD, ...

XP Pro SP2
First off, let me say that I'm not sure this is a true hardware issue, but
since it shows up in Device Manager I thought that I would start by posting
a message in this group.

My firefly works on all computers except my main home computer.  It states
that there is no driver and I need to install software.  Software is supposed
to be on the firefly and automatically start with plug and play.  USB works
because I use my scanner and printer off the same ...

I can not detect my USB external drive ( Fujitsu MHT2040AH ) on my PC, even
though it shows up under device manager and says all OK. Under properties,
under volumes, it provides the following: Disk: Disk 1, Type: Basic, Status:
Online, ]Patition Style: Master Boot Record MBR, ...

I have a laptop running Windows XP Professional.  The compter is running OK.  
The laptop LCD is damaged and is not readable.  How can I reset the default
display to an external monitor on the laptop without the ability to see the
LCD?

Hi,all.
My previous installed CPU is AMD XP 2000 and the motherboard is the
corresponding motherboard, I have backuped my customerized images for the
system and installed application software previously. Now I changed the

Good site that featured some interesting issues and viewpoints.Very
entertaining and tons of free adult entertainment!Lisa--24 Hours Of
Porn--http://www.24hoursofporn.com

Env: WindowsXP, SP2
I have a USB-keyboard. On the keyboard, there are some special keys, such as
"Sleep", "Internet", "Mail" and "P1" & "P2".
Without any special settings, "Sleep", "Internet" and "Mail" keys works

Hi group
I have a machine xpsp2 that have 512mbs ddr2,
is it possible to add 512mbs ddr ?
thanks very much in advance.

while i connecting my mobile i got message " Phone parent found" and
'Windows cannot installed this hardware.As name or service is using by
another application.
Before that i was able to connect my mobile to PC and prior i am using my