I have the following Video card ATI Technologies Inc. 3D RAGE IIC AGP
and a BlueH H19W (16:9) monitor.
The monitor only displays as a 4:3.  There are black vertical lines to
the left and right of the screen.

Windows XP Media suddenly stopped recognizing hardware devices.  I have
yellow question marks on my camera card readers, my dvd burner and my flatbed
scanner.  All worked a t one time.

My Maxtor EHD Personal Storage 3200 is not given a drive letter and I can't
access it, though it is shown as Disk 1 in Drive Management. (right clicking
to allocate a drive letter not an option, it's not there).
It worked finer a couple of weeks ago on an XP machine in England (I'm ...

I've an ASUS A8N-SLI Deluxe, XP Pro, all the service packs and
patches.  The board has Realtek ALC850 sound.  The sound has been a no
brainer
for years.

I recently added a Firefly Borealis illuminated keyboard (hardware) to my
system. I loaded in the included driver (CD) and get a message that
"mHotkey.exe has encountered a problem and must close (etc.)".
the result is that, though the KB works, the hot key functions do not ...

I would like to have 4 monitors setup on my new PC with windows XP Pro. 2
above the other 2. What is the best Graphics card and computer setup for
this. This is for checking the markets (not gaming)
Thanks

My PC stopped working some time ago. I have been trying ever since to
reinstall Win XP (SP2). It starts but does not finish loading the files then
the PC shuts down. What then is the problem and how can I fix it. Note that I
didn't get virus before the problem started . Thank you ...

I thought plug-n-play meant just that, but I am having some issues.
I have Windows XP Pro, Office 2003 and I have a Compaq computer but it has
some updated hardware I have added so it's only partly Compaq today LOL
I had installed a Sabrent PCI USB 2.0 card and a hub. I got this ...

I need to use 2 com ports in the com1 to com4 range, and only com1 is in
use, by my serial port.  Device manager shows that com2, com3, and com4 are
all in use, but they're not, unless my internal modem is using one of them.
Even so, I should still have 2 available ports.  I can't ...

When using DLA to write DVDs, the computer crashes when either the "Make
compatible" option is chosen, the "Eject" option is chosen or the eject
button is touched. Any fixes?
The files are actually written and can be read in other drives.

Hey everyone -- trying not to panic here.
I have windows XP.  I have 2 harddrives -- the C drive, which is the
original drive that came with my computer, and the F drive, a 250 gig
internal drive I installed a while back.

64-bit Microprocessors
http://freedownloadablebooks.blogspot.com/2008/03/64-bit-microprocessors.html
How Microprocessors Work
http://freedownloadablebooks.blogspot.com/2008/03/how-microprocessors-work.html

OK, I had to borrow the floppy drive cable from my Win XP machine to
temporarily use on a friends PC (he didn't have a cable and we wanted to do a
clean install of Windows 98.)
When I put the cable back into my machine (Yes, it's connected properly!),

I am trying ot use a data trasfer program that has always worked flawlessly,
but all of a sudden, it quit working and now says that my computer has no com
port.  I have checked the devise manager and the device manager says that the
com port is functioning OK.

Hi all..am having IBM thinkcentre L9A11704 system with XP loaded ..HDD(SATA
HDD) is not getting detected ..chkd in bios also..tried to make it automatic
detect but failed to do that.....coz of undetected HDD after restarting it's
going to DHCP with revolving cursor page ...plz ...