I have the MS Wireless Keyboard 2000 & Optical Mouse 2000 combo, Windows XP
Professional.  Using the latest IntelliType and IntelliPoint software for
32-bit Windows XP.
Periodically the system pops up a message about low quality signal to the

Hello people
Which will be faster for working with photoshop, CAD, movie editing and so
on:
HP workstation xw6000 with dual Xeon2.8 GHz processors with 533MHz fsb

Is there or is there not a maximum hard drive size that windows is able to
format...installed a  500gb SATA  hard drive to keep my 120gb "C" Drive
company...Windows XP SP 2 tells me it is unable to format this drive...WHY
???  

I just bought a MS Keyboard 4000 and had a question.  How can I set up the
hibermation feature since the keyboard does not have a sleep or hibernation
key? Is there a command string I can use for that?
Thanks in advance.

I see two of the following in the Device Manager with yellow icons
containing an "!"
HID Non-User Input Data Filter
The Properties/General and Driver tabs shows the same data for both of them.

I was hoping someone in here could help me with a problem I've been
having with my computer crashing.
I'm not exactly sure when this all started, but it was well over a
year ago (my computer is about 4 years old). About every 30 days or so

when this device is enabled, the speed of the down load drops from 1meg to
450kbps. it uses pci usb2.0 connect
any thoughts on why the speed drop

I have a Microsoft Wireless Laser Keyboard 6000 v2.0 (and mouse).
Sometimes it work OK and sometime some of the special buttons do not work.
For example, the two volume control buttons will not control the volume.
In fact that whole series of buttons and the ones to the left of the

I have a Dell Dimension 2350 Desktop. I plugged in a new Mouse this morning,
put the installation disk in and all was ok. Used the computer for a short
while then switched off as normal. Remembered there was something else I
wanted to do so switched Comp back on but no joy. The ...

I've done it before - will do it again - and the age-old problem cannot be
rectified by this old guy....  I want to replace my "C" (boot) drive with a
larger/faster drive.  First, I back up my stuff.   I Install the new larger
drive.  I use every type of "copy" software known to ...

My CD Burner dosent work anymore. It hasnt worked for a while so I bought an
external burner & now its stopped working too. I dont know if my computer is
somehow messing up the drives. When I look at the properties, it says the
drives (both E & F ) are working properly but ...

I've had two major problems with my T61 laptop since receiving it about 3
weeks ago. The biggest problem is that when I put it into any low power
mode (mainly I use shutdown or standby), it continually exits the mode,
then re-enters the mode until eventually the battery is dead. ...

Is this the XP home or the Presario hardware that stops the boot up?
Is this COMPAQ PRESARIO S5100NX 2.6 Ghz; MB (Mother board) broken?
It stops at reboot with these 3 lines in the BIOS;
1. Award Medallion Biox v 6.0

How to make an older NON PCI X Computer with only IDE run faster or more
reliable with Video editing?
Will this COMPAQ PRESARIO S5100 boot up with the 2 IDE channels on this
Motherboard P4G533LA ASUSTeK and the Award BIOS v6.0 know the 2nd DATA cable

We currently have (2) 320GB drives set up as Raid 1.  The drive is partioned
50GB for the boot partition and the remainder for data.  We want to replace
the drives with (2) 500GB ones.  We want to replace one and then use the
Intel Raid utility in Windows to rebuild it.  When ...