I've installed SP3 on my Lenovo M55e desktop (WiXP Pro) and experience an
elusive problem, a blue screen reporting a hardware problem, sending me to my
hardware provider, and described an a memory parity error.
Well, the first diagnosis stage was a replacement of the memory cards. ...

When I insert a CF card containing 400mb of photos into an external USB card
reader, the autoplay window pops up and I choose 'open folder' . Upon
choosing this, a window opens up and starts to display all the images.
However, before all the images are displayed, the window shuts ...

Dell MOBO Will Not Install XP Home.  Is it the MOBO or is it the RAM Memory?
These same files will not install.  Using 2 different known 'Good Discs'.
Using 2 different known 'Hard Drives'
The Dell Diag CD was created and run.  No problems found.

I am running XP SP3.  I just got a strange blue screen, while I was composing
an email.  All functions and processes have been operating normally all year.
The screen was not specific to one problem, but suggested that a hardware or
software problem had occurred - that I should ...

Some said, when USB memory stick putting on PC, it can start autostart
programs, like Autorun.inf of CD-R. Does any know how to do it?
Thanks,
M.M.

On Windows XP, HP desktop, couple years old, every 10-20 days my mouse cursor
might freeze up overnight.  GE optical USB mouse.  Do I need a newer driver?  
Is there a way to unfreeze it without rebooting?  I close all applications at
end of day.  Thanks, Bob

I know there are adapters that allow you to plug memory cards into an IDE
port. It's transparent to the operating system so it shows up as a drive in
My Computer.
Are there any that do the reverse?

Recently I tried to copy a number of folders full of photo files from my
secondary hard drive to a CF memory card via an external 2.0 USB card
reader. One image folder was 1.5GB; another was 311MB.  Occasionally, during
the copying I will get an error message stating the a ...

I had to replace my two computers, but, saved their master hard drives in
order to retrieve the user data later. The drives are one IBM Deskstar
ATA/IDE 41.1 GB and one Western Digital WD 400 IDE 40.0 GB. Both drives have
filesystem NTFS and both were bootable masters with ...

After very useful help from this group earlier, I am now deciding which
external drive to buy. I am converting to USB 2.0 but on seeing a number of
sales sites often 2.5 drive is shown as laptop and 3.5 as desktop. As I have
very little backup 40 GB would give me ample space.  I ...

I have purchased a USB 2.0 upgrade when it arrives is it advised to remove
my 4 port 1.1 card and put upgrade in that slot. Will this benefit the PC
power wise or boot up process being slowed with two cards in !
Regards Roger

I have a USB memory stick which needs to be assigned as drive D - because
that is where software is specifically writing to.  However, if I boot up
without the USB memory stick another drive (the CD) is allocated to the now
missing drive letter and I have to re-assign both of ...

I reinstalled whole Windows XP in my computer after a continuos reboot
problem (I never found the cause).  I left the Genius Webcam Messenger set up
to the end, and just after I installed it, a pop-up window warned me that
some drivers were changed to an unknown version and that ...

i found my desktop USB no longer functioning after I connect a usb hub to a
usb port connector  on the motherboard. Even I remove the usb hub or reset
the cmos/bios settings dosen't help. It seems that no power output from all
the usb ports/usb port connectors. I am sure its ...

When I plug in ipod nano, device status states :Windows cannot use this
hardware because it has been prepared for "safe removal" but it has not been
removed from the computer. (Code 47)  Can anyone help me with this situation?