5 xp's, 1x98se wireless and one win2k running as a server.
All are plugged in to either the modem or "router".
Had problems over past couple of months wiht connection so a guy that was
helping us replaced wires and then replaced our 5 port router with a 5 post

3 PC's are connected via 4-port router from Linksys.
In the past all 3 PC's were able to look into each other, since file sharing
was enabled, and a central printer could be accessed easily.
Now, even after running the networking wizard, I can see (under "My Network

I have two towers/two laptops, all running WinXP Pro.  (Laptops are
wireless)
I just installed a new, second hard drive in one of the towers to use as
storage for all networked machines.  I "shared" the drive "F" among all

I am using a D-link DI524 router to share my broadband between my desktop
and laptop. They are both connected to the router with cables and the
broadband cable is connected directly into the router. The internet works
fine, but i am not able to set up a network between my ...

I am using windows XP, the problem is that I am unable to logon my
machine bcz I have forgot my administrative password.
So, please help me to troubleshoot my problem
Regards,

I'm just after a little advice. I run an Online Access Centre that has 17
computers all connected through a server running Windows Server 2003. Our
governing body that provides our funding has now said that we can't have a
server (reason unknown) and that we should adopt a peer ...

I have two computers, my main and my secondary,
the secondary has one NIC, and i have setup the LAN with no problems.
My main has two NIC's one connecting the LAN and the other is connected to a
router located on the roof of my house, because i have wirless broadband.

I had recently purchased a new "Linksys wireless-G ADSL Gatway" gateway to
connect more than 1 computer to the internet .But I'm trying to establish a
home network right now with that gateway ,can it be done .And for information
I have tried to start game on network and there was ...

I have 4 machine, 3 running win xp pro and 1 win xp home edition. At the
moment it is set up to ICS. I want to set up to networking where any of the
four computer can connect to the internet without getting connection from the
host computer. I have a ADSL MODEM with one port at ...

I am on a network with 2 other computers and a server, on the server it shows
my computer in a new network. I can log on at the 2 other computers, but my
computer will not let me log in. It says I am using the wromg password and I
should check my user name and domain.

I've setup remote desktop, but want to be able to access my computer through
my linksys firewall(at home) from work.  
I have the ip address for my router, and internal ip address, and dns
address, and mac address. - can I put some form of those into the ip address

I have a small peer to peer network, with all pc's running xp
professional the problem is that if I am not logged onto my pc
others can't access the shared folders. I want the users to be able to
access these files without me having to be logged on.

Here's my task:
I have a laptop with a wireless internet card in it. It gets its feed
from a nearby node. The laptop also has a built-in 10/100 port which is
enabled but is not currently being used.

i am using two pcs which are both using winxp.
I used  the wizard to share the broadband connection which requires a use
name and pass.
After that, both machines can go online but how do i share the files between

I have had a wireless network in my house for a year, but it has
cold spots that are inconvenient for my wife's work-at-home days.
And she sometimes has configuration problems after working in a
wireless cafe.  So I thought I'd try powerline networking as a