We have a windows 2003 (std edition) based server, which is occupied
with 2 ethernet cards. We are trying to set that server to function as
a router. When trying to Configure the Routing and Remote Access Server
(under Administrative Tools)we get the following massege:

When I boot up my 98 PC which is networked to my XP PC I am asked for the
Entire Network Password for MS Networking.
This is a nuisance and is not required. How do I get rid of this?
Blair

I have the same problem: my home network only has one desktop and one laptop
both running XP SP2 but My Network Places on my laptop is extremely slow (30
to 60 seconds) and keeps displaying old network shares although after 48
hours, non-available shares should be deleted. On my ...

I use VPN Software (Nortel Networks Contivity VPN Client v 4.15) to connect
to my network at work from my home computer. I recently upgraded to DSL from
dial-up, but have been unable to connect through my VPN to work from the DSL
connection. It gets to the point where it attempts ...

I'm installing the software that came with the card.  Driver installs
correctly and I can use the Windows wireless network confiruation utility
and I do get the card to work but when I try to install the Linksys line
monitor software it fails saying the installation was ...

I have 2 PC's connected directly by ethernet cable.  Neither has an Internet
connection.  One runs XP home, the other runs ME.  I was able to  run a
successful networking wizard on XP, and as prompted, made a start-up
networking disc for the ME machine and successfully comleted ...

We have a wireless LAN for 4 pc's which works fine for a couple hours. Then
we can not connect to a couple of the computers. It varies on the pc's & the
time. Is there a tool we can use to wake up pc's or ... . TIA

Hi and good day.  I have recently purchased a new machine which as XP Media
Center on it.  I was able to change the configuration to allow username
password authentication throught user profiles, but I want to be able to
authenticate on Windows 2000 Server, but cannot log into ...

My net:
DSL router 192.168.1.1
WinXP 192.168.1.10 gateway 192.168.1.1
     192.168.0.1

Can anyone help with this problem.  I have two laptop PCs connected to a
D-Link DI624 wireless router, sharing an internet connection with no problems
at all. However, after running the network set-up wizard on each PC with the
goal of sharing files etc, i'm having problems.

I have set up a local network of 3 machines at 1 location connected to a
linksys router > dsl (static IP). At home my pc is directly connected to the
other linksys router > cable modem (dynamic IP)...
My VPN seems to connect with no problems, I can 'ip access' some of my

I have two home computers that connect to a wired router via ethernet cable.  
The router connects to a cable modem and then to the internet.  Both machines
run Windows XP Pro SP2.  Both have printers which can be accessed by the
other machine.  Neither can access shared files on ...

I'm stumped.  Just got a new laptop and want to collect files off my desktop
before turning it over to the family.  Desktop can ping laptop, laptop can
ping desktop, laptop can ping itself, desktop cannot ping itself.  All
pinging done by addresses shown by ipconfig.  I must not ...

Hello, I have a Compaq Desktop with XP Home Addition, an IBM Laptop with XP
Proffessional, and a  Netgear Router/hub connected to a DSL modem.  The PC's
are ethernet attached to the web via the hub.  It works fine.  I have tried
to set up a home network using the Network Setup ...

XP-Pro/SP2
This is about switching between workgroups and WiFi router
access points. I travel between two offices located in
different cities. Each office has different workgroup and