| Thread | Last Post | Replies |
|
| Using two dsl connections | 12 Feb 2006 03:31 GMT | 2 |
Please help me out. My ISP doesn't give a 512kbps unlimited and I was misguided to buy two 256kbps connections and to bridge them. I just found out after buying it's not possible. My ISP gives a router for each connection having ethernet and USB output. I
|
| using NetMeeting on a home network | 12 Feb 2006 00:26 GMT | 2 |
How can I find the IP to provide others to use NetMeeting while on my home network which incorporates a router. TIA, David
|
| Internet Sharing with XP Pro Problem | 11 Feb 2006 21:44 GMT | 7 |
I'm running XP Pro on my host machine networked with 1 client machine (cross over cable) with XP Home. This morning they were both working fine. I must have blown the NIC in the host and had to replace it. After replacing it I had a hard time getting networking back up. I now
|
| IP address | 11 Feb 2006 21:19 GMT | 4 |
What does this mean & how do iI correct it? "There is an IP address conflict with another system on the network" Three machines are networked with one acting as a server. All 3 computers use XP professional.
|
| Old SSID still showing up | 11 Feb 2006 20:09 GMT | 1 |
Recently switched from internet connection sharing to a hardware router for my kid's upstairs computer (host is an XP, other pc is Win98SE). Am using the same usb network adapter (Ashton Digital Airdash Wireless) as the access point for the h/w router as I did when I networked ...
|
| Ny Network Places: DFS folders shown with wrong location | 11 Feb 2006 19:29 GMT | 1 |
When I add a network place to My Network Places, and the network place is a DFS folder (e.g. \\skov.com\archives\main) the Network Location column shows "The Internet". (use View / Details to see it) This is wrong and confuses my users, it should show "Local Network".
|
| Bridging Two DSL Connections? | 11 Feb 2006 17:12 GMT | 6 |
I have windows xp pro sp2. I just bought two 256kbps DSL connections because my ISP doesn't give 512kbps unlimited. I tried bridging. It bridges but I only one of the connections is getting utilised. Is bridging even possible for Internet Connections?
|
| ad-hoc with USB WLAN card | 11 Feb 2006 17:03 GMT | 2 |
i have a laptop and i'm using it in two different LAN's. both LAN's are wired. i considered the option of buying a USB WLAN card, and setup an Ad-Hoc network between the PC and my laptop
|
| Disable/Enable network connection failure | 11 Feb 2006 15:49 GMT | 1 |
I cannot enable / disable a network connection from the "Network Connections" screen. I can enable / disable by selecting Properties / Configure / Advanced and selecting enable or disable device. When I try to enable / disable from the "Network Connection" Screen Directly
|
| DNS not resolving | 11 Feb 2006 14:48 GMT | 10 |
My problem is seems to be very typical, I am using broadband connection, ISP has given me static ip address. My problem is that I am unable to browse any website using IE explorer, but able to ping gateway, dns, & even yahoo ip. When I tried to ping yahoo.com get the
|
| Can't share files | 11 Feb 2006 14:11 GMT | 19 |
Well.. Firstly, Im really bad with computers and been looking through all these questions etc .. to be honest I havent much of an idea what's going on in them! I have my laptop and desktop connected via cable.. went through the
|
| network / cable modem problem | 11 Feb 2006 13:15 GMT | 3 |
I previously had a long thread going below entitled "WORKGROUP" but have since solved a number of issues regarding my network problems so I decided to start a new thread. I have 2 computers on a network, Win2K & WinXPHome, D-Link hub, can't see
|
| ping | 11 Feb 2006 10:17 GMT | 2 |
Can i lower my ping?If so how?
|
| Printing problems | 11 Feb 2006 10:03 GMT | 1 |
I have a desktop pc with hp laserjet printer attached to it. With my laptop, I am able to use the internet without any problem using the wireless router. However I am having problems with printing. When the Windows firewall (sp2 pack) are on, I can't print using my laptop. When I ...
|
| Starting Over | 11 Feb 2006 06:58 GMT | 1 |
I had to reformatt my hardrive back a few months ago. when doing this for some reason the second computer was not able to "see" the one I reformatted. A couple of weeks after the reformat, for osme reason, they could "see" each other again. Now, suddenly, neother one can see each ...
|