I have a weird problem with one of our systems.
It's a TYAN motherboard using the nForce chipset.
When I hook the network cable up to it (known to be good) it shows
connected.

Ports are forwarded and firewalls for the ports are down. I'm using the
ftp software IIS with winXP pro. I have a http:// server running just
fine from this same computer. I tried to do the same thing with ftp://
and it only works from inside the network. Login is annonymous for now ...

I have Windows XP Pro on a computer that is acting as my file sharing
"server" and I have a Windows XP Home based laptop (call it "Remote") that I
use to access a shared directory on the XP Pro computer. Basically,
everything is working fine, except when I change the username on ...

I have 2 network cards in my computer
to one of them i' ve got my router connected and the settings of this one
are set to obtain IP adress automatically - from the router
the other lan card is used to connect to my companys network, on this one i

Hi,all, there is a desktop which can not logon with password and show me DC
DOWN error,logon only with unplug lan cable, then check by IPCONFIG /ALL, the
network configration is normal ! anybody can help for troubleshooting this
problem ?

I'm having lots of grief in configuring my wireless network. Last week,
before I moved, everything was working fine. I had cable internet, my desktop
PC was connected directly to my wireless router, and my laptop used wireless
to connect to the network. On the weekend I moved, ...

I have an Internet Gateway in my Network Connections Windows which has a
connection that says Internet Connection.
I don't want to make use of this service, such as ICS ... does anyone knows
how to delete this thing ?

I'm attempting to connect my XP computer (host) to an ME computer (client).
I've run the networking wizard, but the host doesn't see the network.  When
I checked IP addresses and network masks, they were not compatible.  Do I
need to set these manually?  If so, any suggestions on ...

Here's what's happening.  I have a brand new XP SP2 system in a workgroup
called DEALER. When i try My Network Places, it gives me a message "DEALER is
not accessible... The list of servers is not available."
When i connect another PC to that workgroup. I'm able to browse the ...

I have set up  file and printer sharing, and created shared folders.
I cannot see these folders in My Network Places/MS Windows Network.
Also when connected to a router I cannot obtain an IP address.
The router is set up for DHCP  and is ok with other computers.

This may be too simple for you guys, BUT... I bot a new CPU yesterday running
WIn XP media center.  I am trying to network with an  older computer running
Win ME through an ethernet hub.  I want to share files and printer.  When I
run the Wizard on the new machine, it wants me to ...

when i try to bridge my network card to my wireless card i keep gettin a
message saying an unexpected error occured. My connection do not have ICS on
so they should be able to bridge.
Thank you for any help that you can provide.

I have a home network with up to 8 computers all running XP.  I would like
one of the systems set to have a default of lowest network priority.  So that
the other systems won't get lagged when the less privlaged system starts to
pull a large file.  Basically this one system is ...

I have a two node home network.  Call node 1 Gateway and node 2 Dell.  
Gateway is a lap top with a wireless network connection via Linksys WAP and
Router.  Dell is hard-wired to the router.  I can map a drive from the
Gateway on the Dell with no problem.  When I try to map a ...

The network I am running has a T1 connection through a Cisco 1841. The DHCP
is run of the server which is a Dell PowerEdge running 2000. There is about
thirty computers and devices running on the network switced through (2)
Netgear FS116 and (1) Linksys 4116. There is also a ...