| Thread | Last Post | Replies |
|
| Connecting to a mapped drive without username & pass | 19 May 2006 23:54 GMT | 4 |
Some of our computers will allow a user to map a drive and auto connect to that drive without prompting for username and password and some won't. Auto connecting meaning after log off or power off. A recent XP OS upgrade was performed on 4 workstations, all four
|
| Drive letters not disconnecting properly. | 19 May 2006 21:35 GMT | 6 |
I realize that there are alot of discussions that sort of touch on this subject however I have gone through alot of troubleshooting and have found nothing that can fix the problem so far. The network drives are simply not disconnecting any way any how when the
|
| cable modem disconnects | 19 May 2006 19:43 GMT | 5 |
everything runs ok but if i turn on the XP Firewall or Zonealarm or a program like BitComet, the connection drops about every 10 minutes..If I reset the modem it comes back on. Any ideas?
|
| Couple of wireless networking questions | 19 May 2006 19:08 GMT | 2 |
Trying to configure my wireless network for a bit of security, following various articles on the subject. XP Pro SP2. Using WPA, pre-shared key, that's working fine.
|
| Limited or no connectiviy for a wired desktop | 19 May 2006 18:33 GMT | 3 |
I have a Dell Dimension 8100 running XP SP2 connected via patch cable to a Linksys router. It has worked uninterrupted for well over a year. Yesterday it working in the morning and when I used it in the afternoon Norton was yelling at me because it couldn't get to the internet. ...
|
| Updating a network printer | 19 May 2006 17:08 GMT | 1 |
Hi, I wanted to find out if there's an easy way to update a network printer for our users? I'm planning to change all my network printer names in my site and wanted to
|
| I keep getting: You (or a program) have requested information from | 19 May 2006 16:37 GMT | 1 |
I'm using Windows XP SP2 with all the security updates applied, and most of the recommended updates. I have two dial-up connections, with one in use most of the time. What happens is this: I log on with the default connection, and download my emails
|
| IP problem | 19 May 2006 15:35 GMT | 9 |
Setting-up a small home network(peer-to-peer), 2 Desktop, 1 Laptop, linksys wireless-G router(w/ 4 port switch), modem. All PCs assign unique names, given the same Group name, All PCs have XP SP2, Run network setup wizard on all three machines, TCP/IP config. to Auto. assign IP ...
|
| DSL modem working fine but no internet. | 19 May 2006 15:02 GMT | 4 |
I am getting the "low or no conectivity" thing and all the symptoms point to a winsock curption but I have tried every salution that I can find on the subject but still I have no internet. I am runing Windows XP SP2. My only gues is that what ever initaly cause the problem still ...
|
| how to create a shortcut to a telnet session? | 19 May 2006 12:35 GMT | 4 |
My Network Places doesn't allow telnet://host.example.com, so how can I create a shortcut? The only thing I've come up with so far is to add it to Internet Explorer's Favorites -- yuck.
|
| My Network Place - Slow Response | 19 May 2006 11:39 GMT | 2 |
I have a problem with certain XP machines on our network that are very slow to open 'my network places'. If I disable Netbios over IP, the response speeds up dramatically and will list all the shared folders from the network. However, I am then unable to
|
| dsl netmeeting call | 19 May 2006 11:09 GMT | 1 |
i have a dsl connection at my home and i am trying to call at my home through dsl, now the in my home network my computer has address 192.168.1.2 and in wan the given ip address i am taking from the router's page. and trying to call at home with that ip address(i'm
|
| One XP Home and two XP Pro | 19 May 2006 04:07 GMT | 1 |
Computer A: 'Jerry' 192.168.0.1 - XP Home Computer B: 'Roy' 192.168.0.3 - XP Pro Computer C: 'Old' 192.168.0.188 - XP Pro All updates on all computers from MS Update.
|
| Workgroup & NTFS Permissions - Remote Network Workstation Access E | 19 May 2006 02:11 GMT | 2 |
Problem: Two XP Boxes located in workgroup. (no domain server) Both with NTFS permissions active. According to KB articles I have read, I can only share folders/files with
|
| Client cannot see server Home Network | 19 May 2006 02:08 GMT | 2 |
Today I decided to network my desktop and laptop computers. Here is how it is setup. Line in to Cable Modem Line from Cable Modem to port #1 on a 2 port Speedstream Router
|