I have two laptops networked to a desktop as a base station with a MN-700 (
all three have XP.  I can access files on the base station from both, but I
can not get them to access each other.  Both give this error "not
accessible..... you might not have permission.....network path ...

Dear Friends,
I have one Windows 2003 server and 5 nodes of windows XP Pro with SP2. I
have one Broadband internet connection in one of the windows xp pc. my IP of
this PC have kept 192.168.0.1 and i have enabled Internet sharing. And the

I'm using Windows XP Professional, and a wireless USRobotics router. I
have 3 pc's at home, and my internal IP addresses can change, depending
(I'm assuming) on what order the pc's are turned on/off over time. What
I'd like to do is setup so that my main desktop always has the same ...

I'm using XP with sp2. I'm trying to set up a vpn to connect to my work
computer. In the new connection wizard my options for a dial up connection
and VPN are grayed out, not available.
How can I fix this?

I'm trying to browse my IIS 5.1 Documentation, and the content area is empty,
therefore i'm not able to see anything but the links at the main page.
I'm looking forward to downloading it, or accessing in the msdn, but all i
get is IIS 6.0 operations guides.

I've a question:
Having read this: http://www.speedguide.net/read_articles.php?id=1497
and this article by a spanish MS MVP:
http://www.multingles.net/docs/jmt/sp2_p2p.htm (just skip to the part

Can someone tell me how I can begin to troubleshoot this problem?  Both
my colleague and I are connected to the same VPN.  There is a server
within this configuration with local (private) IP 192.168.0.60.  My
colleague can ping the server fine, but I cannot (my requests

Hi, Does anyone know where the old Freeserve Misc. Newsgroup can be found ?
           Thanks !  Old Mary.

i am trying to establish the above connection but i am finding all the
information is to do with huds ect and not just direct from one computer to
the other. can anyone help me. I have run the network wizard but still can
not seem to get things working.

I have a wireless router downstairs at my house that I access from the
second floor using the built in wireless in my laptop.  I recently
bought a wireless card for the desktop I keep on the second floor so
that it could access the internet through the downstairs wireless

I have multiple computers on a home network and only one of them is unable
to access the internet.  The DHCP server assigns a proper address to the
network device but every time I enter a web address, it goes to 192.168.0.1
and then errors out.  I have reset the HOSTS file to an ...

I very recently, last 2 days, obtained DSL through SBC/AT&T. I've got DSL
working with two computers in the house hooked to their gateway
modem/hub/wirless device. They are both direct connects with an ethernet
cable between the PCs and the gateway device. My PC had been hooked ...

I built an aspx page an put it on my local IIS. I also allowed Web Server on
port 80 in windows xp firewall, but i'm not able to see the page from other
machine connected to the internet.
I'm placing the right IP Address the connection assigned to my machine, as

Situation is the following.
I have pc1 on a network in a small travel agency.  There are 5 pcs in
total.  All systems have genuine windows xp systems installed.  Pc1 is
the troublemaker.

I've got a windows XP SP2 machine running on a home network. Roughly
every 20 hours (though sometimes longer) I lose all connectivity to my
network from this pc. Its as though the ip stack gets corrupted and it
can no longer access anything. If I open a command prompt to check my