After troubleshooting slow speeds my service provider suggested I bypass my
router to "isolate the problem". When I hooked back the router I can no
longer access the internet. I tried troubleshooting the problem by checking
the router''s and the workstation's networking ...

I just read that this can create problems.  As in my futile attempts to
reenable file sharing, I have done so repeatedly, I am wondering how to undo
all the possible conflicts this may have resulted in.

I built a network with Server 2003 with 4 XP clients. Roaming profile
and folder redirection.
Adding a new user is done by copying a usertemplate. Done this 4
times.

We had internet access (DSL) until we enabled the firewall function in the
Windows XP Security Center and also downloaded the new malicious software
update from microsoft. We lost connection and when we would open internet
explorer we would get the message...no server found. We ...

I have 3 PCs on my home network.  The 2 desktops work fine and the notebook
did until the last few days.  It is a Dell Inspiron 6000.  I have a wired
network (Linksys BEFSR41 router/switch) and the PCs pick up a dynamic IP when
they start up.

Hi Guy's
 I looking for a script that will enabled the script to obatin from DHCP.
 Currentlly, Our setup is Static IP and we have 500 workstation in our
company.

Hi, I'm working on a toshiba computer with a broadband connection, the
problem is that my internet is really slow, I know that it's NOT the server
as I plug the same cable to a different laptop and it works fast, but once i
plug it again to my computer it becomes slow agin, I ...

We have this intermittent problem that seems VERY strange;
There is a shared folder on PC1 that 4 other PC's and their users have full
access to (using Simple File/Print sharing, network users have full access,
can modify/delete, etc.).

i am running windows xp pro on a pc and a dell server and keep getting an
error message saying limited or no connectivity, they both keep trying to
renew there ip addresses. i have no idea how to configure the ip addresses,
any help i can get would be appreciated

I've got two Netgear DG834G-routers set up for router-to-router VPN.  On the
one side the router is on the WAN-side of a SBS2003 LAN (LocA) - on the other
side connected to a single subnet (LocB).
My problem is that I can connect from the LAN-side of the SBS2003 LAN (LocA)

(I'm sorry if this is considered cross-posting. I wasn't sure where exactly
to post this.)
#1.  Can I have 2 separate ISP's (networks) going into the same PC at the
same time?

have just added an Appian Graphics Jeronimo Pro four monitor video
card and my speed for all windows and some other program drop down
menus are extremely slow. I added 1024mb ram memory but it didn't
help

I have been trying off and on for months to get this running and sat down for
8 hours today to try to finally do it.  I am able to connect to the internet
from both computers, and I am able to ping to and from both computers.  I
have made sure that I openned my firewalls for the ...

I have a Broadcom BCM4318 Wi-fi adapter connected automatically with
my router after everyboot as well.
My question is: It connects to my router after XP Home SP2 loaded as
normal, but by the minutes pass, it attempts and connects for second?

When adding entries to the hosts file what command do you run without
restarting the PC.
Thanks.