My client has a pub with network camera connected to a local computer.
He used to view it remotely by using internet explorer pointed to
80.***.***.**
He has cancelled his broadband and is now going to change provider. He can

I have Verizon FIOS.  If I go to Speedtest I get numbers that reflect
the performance I am paying for, 15 up, 2 down.  The problem is with
Web behavior and it doesn't seem to matter if I'm using IE or
Firefox.  I click on a link and the status just goes to "done",

I can connect to the internet when I start my computer (XP Pro) in safe mode,
but not otherwise ("Internet explorer cannot display the webpage").  Also,
possibly coincidentally, I seem to have no system restore points other than
one created just today while I was struggling with ...

I have a computer that was running normally for several years.  Suddenly, it
started off the network after about 30 mins after boot.  It couldn't see
other machines and they couldnt see it. Rebooting solves the problem for
another 30 mins or so.  I put a second PCI network card ...

I am having a terrible time setting up my home network since adding a pc
running XP.  The w2k machines are fine, but I can't 'see' the XP machine (and
it can't see the w2k machines).
Of course, the 'wizard' is not compatible with w2k.  What am I missing? I

Hello. Lately, my browser (Firefox) is driving me batty.  When I click
on a link, the progress bar at the bottom right sits there, white, for
10-15 seconds before anythign happens. Then the progress bar zips
across and I go to the linked page.

All of my folders show Read-only in the Property->General check box.
If I clear this, a dialog (Applying Attributes) shows all the sub-folders
being cleared, but when i reopen it, it's back to Read-only again!
I have a peer-to-peer wireless network with a Linksys router.

I'm having a very odd problem. First of all, I have a network between
three computers all running XP Pro, and they've always worked, I just
set the same workgroup for all of them and I'm good, I've never had to
create the same accounts on all computers or whatever that entails.

I previously had a setup where my dlink wireless card bridged with my
lan card, and the network was extended to my 360. That card
suspiciously broke, and now I am left with a belkin F5d8010 pre- N
wireless PCMCIA wireless adapter in my laptop. Whenever I try to bridge

I have a network set up with wireless router, XP home networking, file
sharing, printer sharing, internet access, etc.  Desktop and laptop with XP
on that network.  Works well.
I want to set up a similar network at another location, different desktop,

I want to change computer name for a group of domain computers. Will it
recreate user profile? (I don't wan to reset it.) Thanks.

I thought I had this working the other day, but it is onlly partially
working. Here's the recap:
I have a desktop and laptop each running XP Home and each connected to the
internet via a Linksys WRT54G Wireless Router. The desktop is connected to

I have this problem:
I have a LAN with 2 computers, both have internet connection, works smooth.
I have problems when I tested the /tasklist command from one to another. It
gave me the error: "ERROR: The RPC server is unavailable.". I checked the

I use Window XP sp3 and a ADSL for internet connection.
Yestersay there was a power breakdown when my computer was connected to
Internet  After I powered on the computer again, I could not make a dail up
connection by the reason of  Error 711 The Remote Access Connection Manager

I have a desktop and laptop together on a home network.  I took the laptop
out last week, and when I returned, I found that my desktop cannot get to the
network.  Not sure what happened or how to repair.
1.  I am on xp home sp3