Can anyone help me to find a driver to install an EPSON LX
300 printer in Windows XP ?
Apparently the UNIDRV.DLL is missing and installation aborts..
Also, a USB driver to connect a Sony Cybershot to Win XP ?

I can't print my DOS Program using USB port (printer
type - i320 Cannon).
Please help.
Thanks.

Does anyone know how I can try to install HP Photosmart
P1000 with windows XP, or better yet, my old NEC
Silentwriter 95? Are both now archaic and unuseable?

I have a Dell system (2400 series) and a LEXMARK All-In-One printer.  I've re-installed the printer checked the ribbon, ran a test page but it does not seem to print anything that I request in Windows XP.  The paper goes thru after hearing "now printing" and I get this blank ...

XP will not allow me to print, or to access any printer
preferences, add or delete any print drivers. The error
message indicates that the print spooler service has to
close and will not run. I manually restart it through the

My printer will print anything from any program except
Wordperfect. When I send my Wordperfect document to the
printer, the hourglass comes on and the printer locks
up.Please help.

I have a  Xerox XK50 that i used with my prior machine and Windows 98.  I recently upgrade to a new Dell with XP Home Edition.  My printer will only print on ONE Windows login.  All other users (3) cannot print anything.  I did not see this printer on the XP approved list, but I ...

If a fax sending failed, I can't dial the same number
again. The corresponding number enters into some "Black
List". Hob to enable re-dialing ?

I have a HP 4050 attached to the lpt port on my computer.  
My computer is running Windows XP Pro.  When I try to
print a test page to verify that the printer is installed
properly to my computer ... the test page winds up on

I have a Canon Scanner D1250U2F and I upgraded to a new
2053ghz procesor w/512mhz RAM and XP Pro.
Since this upgrade my scanner will not do a copy fx and I
get an out of memory msg.

Windows fax program lost. Possibly deleted during disc
clean up. Tried fax wizard configure, no luck. No longer
listed under printers. When you highlight the program in
the startup menu, it says Empty. My software was preloaded

Windows XP: How do you get a form definition set up in
Server Properties to show up in the list of Paper Sizes
for a printer?  I have some vague recollection of right-
clicking or double-clicking on the field of the driver

When I click on the add printer wizzard I get the above
message.  The print spooler says it is running and I have
started again  just for good measure.
There is no printer plugged in at this point but I have

Still need to use an old DOS program that needs to access
the LPT1 port when it is loaded/exe'd .     I understand
these old programs liked to print directly to the lptx
ports, however Win XP Pro does not normally permit this.  

I was able to use two side print option with windows 98,
but device information on printer wizard in XP reports
incorrectly that the printer has no capability for two
sided printing.  Is there a way to effect routine two